ebeam evaporation vacuum coater for plastic optical lenses and glass lenses

General Information

Feature:

1. The crystalline diaphragm thickness monitoring,Coating process is full automatic control;
2. Configure the foreign ion source,to ensure uniformity, stability of the film thickness, plating 60 to 70 layers of high quality optical films;
3. Other device select the best of domestic,Not only ensure reliable coating production, at the same time, the machine can achieve the optimal performance;  Provide good products to our customers at low price
4. Can provide to customers a one-time need high-grade optical film formulation process, ( film layer number more than 100, which some famous foreign counterparts can't provide), pull testing machine/process before the equipment ex-works delivery
5. Spectrophotometer was applied to substrate in multiple locations, put standard substrate for coating test and analysis, the uniformity of the heating oven, ion source and ion bombardment uniformity, fixed plate shape, such as fine optimization, ensure the best effect equipment.

Product characteristic:

1.Accurate optic film deposition controller: crystal thickness monitor/optical monitor
2.Center-driving or planetary substrate dome is selectable
3.Uniformed and large area ion beam distribution Hall-ion source
4.E-beam gun, stable power output, small and uniform E-beam spot
5.Well uniformity of film thickness, well repeatability of deposition

Optics Coatings: Anti-Reflection coating ( AF film), optical filter, color separation filter, telescope, periscope, microscope and digital camera.                                                 

Application: Car mirror, Optical lens, Spectacle, Cold light lamp, Decorative Lighting, Rhinestone.

Tag Keywords

optical lens , optical evaporation coating , optical coating machine , Cr39 lens , electron gun evaporation , green lens , red lens , ebeam evaporation  ,  plastic optical lenses , vacuum coater

Parameters : 

Other Parameters:      Water Pressure: > 0.2 to 6 Mpa, 80 L/Min                                      

                                      Water Temperature:≤22ºC

                                      Air Pressure: 0.4 to 0.6 Mpa

                                      Power Supply: 220/380V,60Hz–60KV

Coating Samples